Great Fingall Approved for Development
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
Base case envisages eight-year mine life at +45koz Au per annum.
Westgold Resources Limited (ASX: WGX – Westgold or the Company) is pleased to announce that the Westgold
Board has approved the development of the Great Fingall mine, located 5km southwest of Cue and 28km from
Westgold’s Tuckabianna processing hub.
Highlights
The Great Fingall Base Case envisages:
▪
2.5Mt of ore production at ≈5g/t for 383koz of gold
▪
+45koz pa Au production @ All-In Cost (AIC) ≈$1,801/oz
▪
Initial eight-year mine life with development commencing in early Q2, FY24
o first ore production in H1, FY25
▪
$30M average capital expenditure in FY24 and FY25
▪
Establishes Group gold production pathway to +300koz Au pa
The base case study forecasts compelling financial metrics with significant upside at spot prices:
Financial metrics
Unit
Base Case
Spot Price
Gold price assumption
$/oz
2,600
2,944
Net life of mine (LOM) cash generation
$M
306
436
Net Present Value (NPV)
$M
184
272
Internal Rate of Return (IRR)
%
53
69
Westgold Managing Director Wayne Bramwell commented:
“Great Fingall is one of four +1Moz historic producing mines in Westgold’s portfolio and the
commitment to its development underpins Westgold’s confidence in the Murchison region.
At steady state it will be a long-life, high-grade, high-margin underground mine, producing +45,000oz
a year, with first ore production in H1 FY25. Our base case is conservative and focuses on virgin reef
extensions only. Even on this basis, the returns are compelling.
Significant upside exists from high-grade flat structures and remnant ore that we will develop past as
we push the decline to the virgin parts of this high-grade orebody. These opportunities and the
additional 250 vertical metres of reef depth extensions intersected by Westgold drilling has not yet
been included in the current evaluation or design.
Critically, Westgold is fully funded to undertake this development from operational cashflows. The
first cut in the Great Fingall decline is scheduled for Q2, FY24 and will herald a new beginning for this
iconic mine.”
Westgold Resources Limited (ASX: WGX)
ACN 009 260 306
Level 6, 200 St Georges Terrace, Perth WA 6000
+61 8 9462 3400
perth.reception@westgold.com.au
www.westgold.com.au
ASX: WGX
Great Fingall Overview
The Golden Crown (GC) and Great Fingall (GF) mines, separated by ≈700m along the Great Fingall Dolerite, have
hosted significant historic production, with over 1.55Moz of gold being mined since the late 1800s. Great Fingall
between 1891 and 1929 yielded 1.2Moz of gold from 1.9Mt of ore at a recovered grade of 19.5g/t Au, from
twenty levels developed underground to a depth of 786 metres below the surface.
Mining recommenced in 1995 via open pit methods, focusing on extracting the stockwork vein system in the
footwall of the Great Fingall Reef. The open pit operated up until March 1999, yielding 82koz gold from 1.8Mt
of ore. Two subsequent open pit campaigns, the last by Westgold in 2020, have produced a further 54koz gold
leaving the pit floor 170m below surface with underground decline access established.
Importantly no mining has been conducted on the underground extensions to the orebody for nearly a
century.
Figure 1 – Westgold’s Extensive Murchison Assets Extending from Cue to Meekatharra
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
2
ASX: WGX
During FY23, Westgold de-risked the project with a major drilling campaign targeting the area below the historic
workings. This campaign was successful in proving the continuity and tenor of the Great Fingall Reef extensions,
but critically, it also revealed the existence of a parallel high-grade quartz reef which led to a significant upgrade
in the Great Fingall Mineral Resource Estimate to 588,000oz of contained gold (Refer ASX – Great Fingall
Resource Grows to Half a Million Ounces, 31 May 2023).
Combined with the Golden Grown Mineral Resource of 194koz, the Great Fingall Base Case development plan
is based on a total resource of 782,000oz of contained gold.
Drilling at Great Fingall continues with better results returned in recent drilling (refer Figure 2) targeting a region
immediately below the base of the historic underground mine including 9.66m at 4.38g/t Au from 793m in
23GFDD001_W3 and 15.12m at 4.31g/t Au from 796.78m in 23GFDD002_W1 (refer Appendix A).
Figure 2 – Schematic of Great Fingall Development plan (including latest drilling)
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
3
ASX: WGX
Noting the Great Fingall underground resource remains open at depth, a mine design has been developed which
focuses on the high-margin, high-confidence reef extensions. The design provides optionality to both access
remnant positions higher-up in the mine and evaluate high-grade flat linking structures in the hanging wall and
footwall of the Great Fingall Reef.
Westgold’s base business case for Great Fingall uses conservative gold prices and generates compelling
economics (refer Figure 3 and Table 1). Importantly, the business case does not include the benefits of mining
the remnant positions or high-grade flat linking structures as the decline is developed.
The base business case proposes a project which:
•
builds a +45kozpa mine, with ore processed at the Tuckabianna mill at an AIC of $1,801 and an eight year
initial mine life;
•
produces first ore in H1 FY25 following development commencement in early Q2 FY24;
•
requires modest progressive capital expenditure capable of being fully funded by Westgold’s operational
cash flow, at an average of $30M for FY24 and FY25 with the peak negative cumulative cash flow of $82
and a payback of 4 years1;
•
generates approximately $800/oz of free cashflow at a gold price of $2,600/oz, rising to approximately
$1,140/oz of free cashflow at current spot prices; and
•
is highly value accretive with an NPV of $272M and an IRR of 69% 1, taking Westgold’s group production
through 300koz per annum.
350
300
40
250
30
200
20
150
10
100
50
Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3
(10)
FY24
FY25
FY26
FY27
FY28
FY29
FY30
-
Cumulative Cashflow ($M)
Capital, Operational Cost, Royalties and Cashflow ($M)
50
FY31
(50)
(20)
(100)
(30)
(150)
Cumulative Cashflow
Capital
Operational Cost
Royalties
Cashflow
Figure 3 – Great Fingall Life of Mine Quarterly Cashflow (Base Case @ gold price of $2,600/oz).
1
Assumes spot gold price of $2,944/oz
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
4
ASX: WGX
Table 1 – Great Fingall Base Case Study Metrics
Metrics
Unit
Base Case Feasibility Study Results
Mine production
Mt
2.5
Grade mined
g/t Au
5
Metallurgical recovery
% gold
95
Gold production
‘000 oz
383
Mine life
years
8
Gold price assumption
$/oz
2,600
2,944
Revenue
$M
996
1,128
Life of Mine Capital expenditure
$M
148
148
Operating expenditure
$M
514
514
Government royalties
$M
27
30
Total expenditure
$M
690
693
Net cashflow
$M
306
436
NPV8%
$M
184
272
IRR
%
53
69
Payback
years
4.3
4.0
Peak cash drawdown
$M
87
82
All-in cost (AIC)
$/oz
1,801
1,810
Note: All data is pre-tax real (2023 A$).
Looking Forward
The Great Fingall project will commence development in Q2, FY24.
Equipment is available, key surface infrastructure is in place, an internal management team has been appointed
and recruitment of the rapid development team is progressing.
Great Fingall ore is expected to be transported to Tuckabianna for processing. The ore is of sufficient grade to
provide optionality to transport and process the ore at the Bluebird mill if warranted by business economics.
ENDS
THIS NNOUNCEMENT IS AUTHORISED FOR RELEASE TO THE ASX BY THE BOARD.
MEDIA AND INVESTOR RELATIONS ENQUIRIES
INVESTOR RELATIONS
Kasun Liyanaarachchi| Investor Relations Manager
Investor.Relations@westgold.com.au
+61 458 564 483
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
MEDIA
Peter Knight | Communications Advisor
Peter.Knight@westgold.com.au
+61 459 980 481
5
ASX: WGX
COMPETENT PERSON STATEMENTS
EXPLORATION RESULTS AND MINERAL RESOURCES ESTIMATES
The information in this report that relates to Exploration results and Mineral Resource Estimates is compiled by Westgold
technical employees and contractors under the supervision of Mr. Jake Russell B.Sc. (Hons), who is a member of the Australian
Institute of Geoscientists. Mr Russell is a full-time employee of the company and has sufficient experience which is relevant
to the styles of mineralisation and types of deposit under consideration and to the activities which he is undertaking to qualify
as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves. Mr Russell consents to the inclusion in this report of the matters based on his information in the
form and context in which it appears. Mr Russell is eligible to participate in short- and long-term incentive plans of the
company.
ORE RESERVES
The information in this report that relates to Ore Reserve is based on information compiled by Mr. Leigh Devlin B.Eng.
MAusIMM. Mr. Devlin has sufficient experience which is relevant to the styles of mineralisation and types of deposit under
consideration and to the activities which they are undertaking to qualify as a Competent Person as defined in the 2012 Editions
of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC 2012)”. Mr. Devlin
consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.
Mr. Devlin is a full-time senior executive of the Company and is eligible to and may participate in short-term and long-term
incentive plans of the Company as disclosed in its annual reports and disclosure documents.
FORWARD LOOKING STATEMENTS
Certain statements in this report relate to the future, including forward looking statements relating to Westgold’s financial
position and strategy. These forward-looking statements involve known and unknown risks, uncertainties, assumptions and
other important factors that could cause the actual results, performance or achievements of Westgold to be materially
different from future results, performance or achievements expressed or implied by such statements. Actual events or results
may differ materially from the events or results expressed or implied in any forward-looking statement and deviations are
both normal and to be expected. Other than required by law, neither Westgold, their officers nor any other person gives any
representation, assurance or guarantee that the occurrence of the events expressed or implied in any forward-looking
statements will actually occur. You are cautioned not to place undue reliance on those statements.
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
6
ASX: WGX
APPENDIX A – GREAT FINGALL DEEPS STAGE 2 DRILL INTERSECTIONS
Hole
MGA North
MGA East
RL
Intercept (Downhole)
From (m)
Dip
Azi
23GFDD001_W1
6,961,854
584,360
428
1.30m at 12.15g/t Au
827.00
-75.5
302.2
23GFDD001_W2
6,961,854
584,360
428
1.93m at 6.37g/t Au
787.77
-75.5
302.2
23GFDD001_W3
6,961,854
584,360
428
9.66m at 4.38g/t Au
793.00
-75.5
302.2
23GFDD001_W4
6,961,854
584,360
428
2.30m at 4.56g/t Au
886.70
-75.5
302.2
23GFDD002_W1
6,961,960
584,294
428
15.12m at 4.31g/t Au
796.78
-76.0
301.0
23GFDD002_W2
6,961,960
584,294
428
2.40 m at 8.15g/t Au
798.05
-76.0
301.0
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
7
ASX: WGX
APPENDIX B–JORC2012 TABLE1 – GOLD DIVISION
SECTION 1: SAMPLING TECHNIQUES AND DATA
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code Explanation
Commentary
Sampling techniques
•
Diamond Drilling
•
A significant portion of the data used in resource calculations has been gathered from diamond
core. Multiple sizes have been used historically. This core is geologically logged and
subsequently halved for sampling. Grade control holes may be whole-cored to streamline the
core handling process if required.
Face Sampling
•
At each of the major past and current underground producers, each development face / round
is horizontally chip sampled. The sampling intervals are domained by geological constraints
(e.g. rock type, veining and alteration / sulphidation etc.). The majority of exposures within the
orebody are sampled.
Sludge Drilling
•
Sludge drilling at is performed with an underground production drill rig. It is an open hole
drilling method using water as the flushing medium, with a 64mm (nominal) hole diameter.
Sample intervals are ostensibly the length of the drill steel. Holes are drilled at sufficient angles
to allow flushing of the hole with water following each interval to prevent contamination.
Sludge drilling is not used to inform resource models.
RC Drilling
•
Drill cuttings are extracted from the RC return via cyclone. The underflow from each interval is
transferred via bucket to a four-tiered riffle splitter, delivering approximately three kilograms of
the recovered material into calico bags for analysis. The residual material is retained on the
ground near the hole. Composite samples are obtained from the residue material for initial
analysis, with the split samples remaining with the individual residual piles until required for resplit analysis or eventual disposal.
RAB / Aircore Drilling
•
Combined scoops from bucket dumps from cyclone for composite. Split samples taken from
individual bucket dumps via scoop. RAB holes are not included in the resource estimate.
Blast Hole Drilling
•
Cuttings sampled via splitter tray per individual drill rod. Blast holes not included in the
resource estimate.
•
All geology input is logged and validated by the relevant area geologists, incorporated into this
is assessment of sample recovery. No defined relationship exists between sample recovery and
grade. Nor has sample bias due to preferential loss or gain of fine or coarse material been noted.
•
•
•
Drilling techniques
•
•
•
Drill sample recovery
•
Logging
•
•
•
Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry
standard measurement tools appropriate to the minerals under investigation, such as down
hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken
as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report.
In cases where ‘industry standard’ work has been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases more explanation may be required, such
as where there is coarse gold that has inherent sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).
Method of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the
samples.
Whether a relationship exists between sample recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and geotechnically logged to a level of •
detail to support appropriate Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.)
photography.
•
The total length and percentage of the relevant intersections logged
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
Westgold surface drill-holes are all orientated and have been logged in detail for geology, veining,
alteration, mineralisation and orientated structure. Westgold underground drill-holes are
logged in detail for geology, veining, alteration, mineralisation and structure. Core has been
logged in enough detail to allow for the relevant mineral resource estimation techniques to be
employed.
Surface core is photographed both wet and dry and underground core is photographed wet.
8
ASX: WGX
Criteria
JORC Code Explanation
Commentary
All photos are stored on the Company’s servers, with the photographs from each hole
contained within separate folders.
•
Development faces are mapped geologically.
•
RC, RAB and Aircore chips are geologically logged.
•
Sludge drilling is logged for lithology, mineralisation and vein percentage.
•
Logging is quantitative in nature.
•
All holes are logged completely, all faces are mapped completely.
Sub-sampling techniques
and sample preparation
•
•
•
•
•
•
•
•
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
Quality control procedures adopted for all sub-sampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is representative of the in-situ material collected,
including for instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material being sampled.
•
•
•
•
•
•
•
•
Quality of assay data and
laboratory tests
•
•
•
The nature, quality and appropriateness of the assaying and laboratory procedures used and •
whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in
determining the analysis including instrument make and model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision •
have been established.
•
•
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
Blast holes -Sampled via splitter tray per individual drill rods.
RAB / AC chips - Combined scoops from bucket dumps from cyclone for composite. Split
samples taken from individual bucket dumps via scoop.
RC - Three tier riffle splitter (approximately 5kg sample). Samples generally dry.
Face Chips - Nominally chipped horizontally across the face from left to right, sub-set via
geological features as appropriate.
Diamond Drilling - Half-core niche samples, sub-set via geological features as appropriate.
Grade control holes may be whole-cored to streamline the core handling process if required.
Chips / core chips undergo total preparation.
Samples undergo fine pulverisation of the entire sample by an LM5 type mill to achieve a 75µ
product prior to splitting.
QA/QC is currently ensured during the sub-sampling stages process via the use of the systems
of an independent NATA / ISO accredited laboratory contractor. A significant portion of the
historical informing data has been processed by in-house laboratories.
The sample size is considered appropriate for the grain size of the material being sampled.
The un-sampled half of diamond core is retained for check sampling if required. For RC chips
regular field duplicates are collected and analysed for significant variance to primary results.
Recent drilling was analysed by fire assay as outlined below;
A 40g sample undergoes fire assay lead collection followed by flame atomic adsorption
spectrometry.
The laboratory includes a minimum of 1 project standard with every 22 samples
analysed.
Quality control is ensured via the use of standards, blanks and duplicates.
No significant QA/QC issues have arisen in recent drilling results.
Historical drilling has used a combination of Fire Assay, Aqua Regia and PAL analysis.
These assay methodologies are appropriate for the resources in question.
9
ASX: WGX
Criteria
JORC Code Explanation
Verification of sampling and
assaying
•
•
•
•
Commentary
The verification of significant intersections by either independent or alternative company •
personnel.
•
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data storage
(physical and electronic) protocols.
•
Discuss any adjustment to assay data.
•
•
Location of data points
•
•
•
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), •
trenches, mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
•
Quality and adequacy of topographic control.
•
Data spacing and
distribution
•
•
•
Data spacing is variable dependent upon the individual orebody under consideration. A lengthy
history of mining has shown that this approach is appropriate for the Mineral Resource
estimation process and to allow for classification of the resources as they stand.
Compositing is carried out based upon the modal sample length of each individual domain.
Drilling intersections are nominally designed to be normal to the orebody as far as
underground infrastructure constraints / topography allows.
Development sampling is nominally undertaken normal to the various orebodies.
Where drilling angles are sub optimal the number of samples per drill hole used in the
estimation has been limited to reduce any potential bias.
It is not considered that drilling orientation has introduced an appreciable sampling bias.
•
•
Whether the orientation of sampling achieves unbiased sampling of possible structures and •
the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key mineralised •
structures is considered to have introduced a sampling bias, this should be assessed and •
reported if material.
Sample security
•
The measures taken to ensure sample security.
•
•
•
•
All data is spatially oriented by survey controls via direct pickups by the survey department.
Drillholes are all surveyed downhole, deeper holes with a Gyro tool if required, the majority
with single / multishot cameras.
All drilling and resource estimation is preferentially undertaken in local mine grid at the various
sites.
Topographic control is generated from a combination of remote sensing methods and groundbased surveys. This methodology is adequate for the resources in question.
Data spacing for reporting of Exploration Results.
•
Whether the data spacing and distribution is sufficient to establish the degree of geological
and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
•
Whether sample compositing has been applied.
Orientation of data in
relation to geological
structure
Audits or reviews
No independent or alternative verifications are available.
Virtual twinned holes have been drilled in several instances across all sites with no significant
issues highlighted. Drillhole data is also routinely confirmed by development assay data in the
operating environment.
Primary data is collected utilising LogChief. The information is imported into a SQL database
server and verified.
All data used in the calculation of resources and reserves are compiled in databases
(underground and open pit) which are overseen and validated by senior geologists.
No adjustments have been made to any assay data.
The results of any audits or reviews of sampling techniques and data
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
•
For samples assayed at on-site laboratory facilities, samples are delivered to the facility by
Company staff. Upon delivery the responsibility for sample security and storage falls to the
independent third-party operators of these facilities.
For samples assayed off-site, samples are delivered to a third-party transport service, who in
turn relay them to the independent laboratory contractor. Samples are stored securely until
they leave site.
Site generated resources and reserves and the parent geological data is routinely reviewed by
the Westgold Corporate technical team.
10
ASX: WGX
SECTION 2: REPORTING OF EXPLORATION RESULTS
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code Explanation
Mineral tenement and land
tenure status
•
•
Commentary
Type, reference name/number, location and ownership including agreements or material •
issues with third parties such as joint ventures, partnerships, overriding royalties, native •
title interests, historical sites, wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any known impediments •
to obtaining a licence to operate in the area.
•
Native title interests are recorded against several WGX tenements.
The CMGP tenements are held by the Big Bell Gold Operations (BBGO) of which Westgold has
100% ownership.
Several third-party royalties exist across various tenements at CMGP, over and above the state
government royalty.
The Fortnum Gold Project tenure is 100% owned by Westgold through subsidiary company Aragon
Resources Pty. Ltd. Various Royalties apply to the package. The most pertinent being;
•
•
•
•
$10/oz after first 50,000oz (capped at $2M)- Perilya
State Government – 2.5% NSR
The tenure is currently in good standing.
There are no known issues regarding security of tenure.
There are no known impediments to continued operation.
WGX operates in accordance with all environmental conditions set down as conditions for grant of
the leases.
The CMGP tenements have an exploration and production history in excess of 100 years.
The FGP tenements have an exploration and production history in excess of 30 years.
Westgold work has generally confirmed the veracity of historic exploration data.
Exploration done by other
parties
•
Acknowledgment and appraisal of exploration by other parties
•
•
•
Geology
•
Deposit type, geological setting and style of mineralisation.
MGO
•
MGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the northwest
of the Yilgarn Craton. Greenstone belts trending north-northeast are separated by granite-gneiss
domes, with smaller granite plutons also present within or on the margins of the belts.
•
The Paddy’s Flat area is located on the western limb of a regional fold, the Polelle Syn- cline, within
a sequence of mafic to ultramafic volcanics with minor interflow sediments and banded ironformation. The sequence has also been intruded by felsic porphyry dykes prior to mineralisation.
Mineralisation is located along four sub-parallel trends at Paddy’s Flat which can be summarized
as containing three dominant mineralisation styles:
•
•
9 AUGUST 2023
GREAT FINGALL APPROVED FOR DEVELOPMENT
Sulphide replacement BIF hosted gold. Quartz vein hosted shear-related gold.
Quartz-carbonate-sulphide stockwork vein and alteration related gold.
The Yaloginda area is a gold-bearing Archaean greenstone belt situated ~15km south of
Meekatharra. The deposits in the area are hosted in a strained and metamorphosed volcanic
sequence that consists primarily of ultramafic and high-magnesium basalt with minor komatiite,
peridotite, gabbro, tholeiitic basalt and interflow sediments. The sequence was intruded by a
variety of felsic porphyry and intermediate sills and dykes.
The Reedy’s mining district is located approximately 15 km to the south-east to Meekatharra and
to the south of Lake Annean. The Reedy gold deposits occur with- in a north-south trending
greenstone belt, two to five kilometres wide, composed of volcano-sedimentary sequences and
separated multiphase syn- and post-tectonic granitoid complexes. Structurally controlled the gold
occur.
11
ASX: WGX
Criteria
Drill hole Information
JORC Code Explanation
•
•
Commentary
CGO
•
CGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the northwest
of the Yilgarn Craton. Greenstone belts trending north-northeast are separated by granite-gneiss
domes, with smaller granite plutons also present within or on the margins of the belts.
•
Mineralisation at Big Bell is hosted in the shear zone (Mine Sequence) and is associated with the
post-peak metamorphic retrograde assemblages. Stibnite, native antimony and trace arsenopyrite
are disseminated through the K-feldspar-rich lode schist. These are intergrown with pyrite and
pyrrhotite and chalcopyrite. Mineralisation outside the typical Big Bell host rocks (KPSH), for
example 1,600N and Shocker, also display a very strong W-As-Sb geochemical halo.
•
Numerous gold deposits occur within the Cuddingwarra Project area, the majority of which are
hosted within the central mafic-ultramafic ± felsic porphyry sequence. Within this broad
framework, mineralisation is shown to be spatially controlled by competency contrasts across, and
flexures along, layer-parallel D2 shear zones, and is maximised when transected by corridors of
northeast striking D3 faults and fractures.
•
The Great Fingall Dolerite hosts the majority gold mineralisation within the portion of the
greenstone belt proximal to Cue (The Day Dawn Project Area). Unit AGF3 is the most brittle of all
the five units and this characteristic is responsible for its role as the most favourable lithological
host to gold mineralisation in the Greenst
Share your feedback
Discover