Great Fingall Deeps - Outstanding Drill Results Continue
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
23 MAY 2023
GREAT FINGALL DEEPS – OUTSTANDING DRILL RESULTS CONTINUE
Latest Drilling Builds Confidence in Revised Geological Model
Westgold Resources Limited (ASX: WGX) (Westgold or the Company) is pleased to provide a further update in
relation to the drilling program at the high-grade Great Fingall gold deposit near Cue in Western Australia.
Highlights
Three new drill holes support the recently revised geological model – the Great Fingall Reef is now
interpreted to split into two parallel reefs (Upper Fingall and Lower Fingall) below the historic workings.
Outstanding assay results returned from positions supporting the new geological model including:
o
5.00m @ 5.66g/t Au from 869.00m in hole GFD011_23W1 (Upper Fingall Reef)
o
4.20m @ 5.46g/t Au from 912.80m in hole GFD011_23W1 (Lower Fingall Reef)
o
1.30m @ 46.72g/t Au from 849.70m in hole GFD019_23W1 (Upper Fingall Reef)
o
5.50m @ 16.68g/t Au from 925.00m in hole GFD019_23W1 (Lower Fingall Reef)
o
10.06m @ 3.02g/t Au from 948.94m in hole GFD020_23W1 (Upper Fingall Reef)
o
10.50m @ 2.58g/t Au from 997.00m in hole GFD020_23W1 (Lower Fingall Reef)
A new Mineral Resource Estimation (MRE) based on the revised geological model and the latest drilling
results is expected to be announced in early June 2023.
Pending a positive Final Investment Decision (FID), Westgold could restart the existing shallow decline in
Q1, FY24.
Westgold Managing Director, Wayne Bramwell commented:
“Westgold’s latest results at Great Fingall herald a new future for this historic high grade mine.
Deep drilling has successfully returned high grade intercepts and defined twin parallel reefs, rather than
the previously interpreted single reef. This new interpretation significantly derisks development plans and
has the potential to materially increase Mineral Resources and improve potential mine economics above
prior estimates.
Our confidence continues to grow in this near-term development target and pending a new Mineral
Resource Estimate and a Final Investment Decision, we will be ready to recommence decline development
in Q1, FY24.
Great Fingall is an icon in Western Australia that has historically produced more than 1.2Moz of gold. To
see it restart under Westgold ownership and become a long term sustainable and profitable operation is
the objective. Most importantly, it would also show the quality of the organic growth opportunities within
our portfolio that drilling can unlock.”
Westgold Resources Limited (ASX: WGX)
ACN 009 260 306
Level 6, 200 St Georges Terrace, Perth WA 6000
+61 8 9462 3400
perth.reception@westgold.com.au
www.westgold.com.au
ASX: WGX
Great Fingall – An Iconic High-Grade Underground Mine
The Golden Crown (GC) and Great Fingall (GF) mines, separated by ≈700m along the Great Fingall Dolerite, have
hosted significant historic mine production, with more than 1.55Moz of gold being mined since the late 1800’s.
Between 1891 and 1929 Great Fingall yielded 1.2Moz of gold from 1.9Mt of ore at a recovered grade of 19.5g/t
Au from 20 levels developed underground to a depth of 786 metres below the surface. Extensional drilling in
the 1980’s confirmed the continuation of the orebody to a depth >1,000m below surface with the system
remaining open at depth. In 2019, Westgold drilled hole 19GCDD028 which intersected the Fingall Reef >400m
down plunge from the then deepest historic drill hole confirming the significance of the Great Fingall orebody.
Revised Geological Model
With a view to FY24/25 mine development, the Fingall Deeps drilling program commenced in October 2022 to
test the next 200m x 200m panel of mineralisation beneath the existing Mineral Resource. Geological logging
and interpretation of the early holes suggested the then current geological model, which had the Fingall Reef
flattening at depth with a series of footwall reefs, required revision. This historic model was largely informed by
1980s era drilling that had limited structural data (i.e. recording of the strike and dip of intersected reefs) and
hole 19GCDD028, drilled by Westgold in 2019, suggested the Fingall Reef was flattening with depth (Figure 1a).
The revised geological model for Great Fingall (Figure 1b) positively predicts that the Fingall Reef bifurcates (i.e.
splits into two parallel reefs). This interpretation is based on the first round of Fingall Deeps holes including
22GFDD006 and 22GFDD007 (refer ASX Release of 27 March 2023 for details) and a detailed review of the
geology intersected in the 1980’s era drilling.
Figure 1(a) - Simplified Section Showing 2022
Fingall Reef Model
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
Figure 1(b) - Simplified Section Showing 2023 Fingall Reef
Model and drilling completed during the current program
2
ASX: WGX
New Drilling Supports Revised Geological Model
As a step towards confirming the revised geological model, during March and April, three new holes were drilled
as re-entries and wedges from 1980s era drill holes within the existing Mineral Resource area. These holes were
GFD011_23W1, GFD019_22W1 and GFD020_23W1 as shown on Figure 1b.
All three holes intersected the predicted positions of the Upper and Lower Fingall Reefs and returned highly
encouraging intersections as summarised in the Highlights section and detailed in Appendix A.
Figure 2 - Lower Fingall Reef in Hole GFD019_23W1 Returned 5.50m @ 16.68g/t Au (Assays Annotated)
Looking Forward
The Fingall Deeps drilling program has now been paused to allow completion of a new MRE based on the revised
geological model. Westgold expects to release this resource update in June and make a Final Investment
Decision to recommence decline development at Great Fingall in July.
It should be noted that a shallow, dry and intact modern decline exists at Great Fingall to a depth of
approximately 160m below surface. Westgold has surplus underground fleet ready to rapidly deploy and
pending a positive FID, development at Great Fingall could commence rapidly in Q1, FY24.
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
3
ASX: WGX
Figure 3 - Westgold’s Extensive Murchison Assets Extending from Cue to Meekatharra
ENDS
THIS ANNOUNCEMENT IS AUTHORISED FOR RELEASE TO THE ASX BY THE BOARD.
Media and Investor Relations Enquiries
INVESTOR RELATIONS
Kasun Liyanaarachchi| Investor Relations Manager
Investor.Relations@westgold.com.au
+61 458 564 483
www.westgold.com.au
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
MEDIA
Peter Knight | Communications Advisor
Peter.Knight@westgold.com.au
+61 459 980 481
4
ASX: WGX
COMPETENT PERSON STATEMENTS
EXPLORATION RESULTS
The information in this report that relates to Exploration results has been compiled by Westgold technical employees and contractors under
the supervision of Mr. Simon Rigby B.Sc. (Hons), who is a member of the Australian Institute of Geoscientists. Mr Rigby is a full-time employee
of the company and has sufficient experience which is relevant to the styles of mineralisation and types of deposit under consideration and
to the activities which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Rigby consents to the inclusion in this report of the matters based
on his information in the form and context in which it appears. Mr Rigby is eligible to participate in short- and long-term incentive plans of
the company.
FORWARD LOOKING STATEMENTS
Certain statements in this report relate to the future, including forward looking statements relating to Westgold’s financial position and
strategy. These forward-looking statements involve known and unknown risks, uncertainties, assumptions and other important factors that
could cause the actual results, performance or achievements of Westgold to be materially different from future results, performance or
achievements expressed or implied by such statements. Actual events or results may differ materially from the events or results expressed
or implied in any forward-looking statement and deviations are both normal and to be expected. Other than required by law, neither
Westgold, their officers nor any other person gives any representation, assurance or guarantee that the occurrence of the events expressed
or implied in any forward-looking statements will actually occur. You are cautioned not to place undue reliance on those statements.
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
5
ASX: WGX
APPENDIX A – GREAT FINGALL DEEPS DRILL INTERSECTIONS
Hole
MGA North
MGA East
RL
Intercept (Downhole)
From (m)
Dip
Azi
GFD020_23W1
6962205.0
583850.0
436.5
1.50m @ 9.04 g/t
945.00
-70.3
132.5
Inc. 0.65m @ 17.15 g/t
945.38
10.06m @ 3.02 g/t
948.94
Inc. 0.60m @ 19.80 g/t
956.00
10.50m @ 2.58 g/t
997.00
Inc. 2.30m @ 5.72 g/t
999.50
7.00m @ 2.54 g/t
1018.00
1.30m @ 46.72 g/t
849.70
-70.8
139.5
Inc. 0.60m @ 98.00 g/t
849.70
4.68m @ 3.93 g/t
896.85
5.50m @ 16.68 g/t
925.00
Inc. 3.50m @ 24.88 g/t
925.50
5.00m @ 5.66 g/t
869.00
-75.0
120.0
4.20m @ 5.46 g/t
912.80
Inc. 0.20m @ 77.14 g/t
912.80
1.00m @ 4.97 g/t
936.00
3.90m @ 5.42 g/t
939.10
Inc. 0.53m @ 25.1 g/t
939.57
3.00m @ 5.52 g/t
968.00
Inc. 1.00m @ 14.90 g/t
970.00
2.40m @ 7.44 g/t
973.60
Inc. 1.17m @ 13.70 g/t
974.23
GFD019_23W1
GFD011_23W1
6962251.1
6962140.4
583936.6
583966.4
434.1
430.6
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
6
ASX: WGX
SECTION 1 SAMPLING TECHNIQUES AND DATA
APPENDIX B – JORC 2012 TABLE 1
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code Explanation
Sampling techniques
•
•
•
•
Drilling techniques
•
•
•
Drill sample recovery
•
Commentary
Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry Diamond Drilling
standard measurement tools appropriate to the minerals under investigation, such as down •
A significant portion of the data used in resource calculations has been gathered from diamond
hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken
core. Multiple sizes have been used historically. This core is geologically logged and
as limiting the broad meaning of sampling.
subsequently halved for sampling. Grade control holes may be whole-cored to streamline the
core handling process if required.
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Face Sampling
Aspects of the determination of mineralisation that are Material to the Public Report.
•
At each of the major past and current underground producers, each development face / round
is horizontally chip sampled. The sampling intervals are domained by geological constraints
In cases where ‘industry standard’ work has been done this would be relatively simple (e.g.
(e.g. rock type, veining and alteration / sulphidation etc.). The majority of exposures within the
‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to
orebody are sampled.
produce a 30 g charge for fire assay’). In other cases more explanation may be required, such
as where there is coarse gold that has inherent sampling problems. Unusual commodities or Sludge Drilling
mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information. •
Sludge drilling at is performed with an underground production drill rig. It is an open hole
drilling method using water as the flushing medium, with a 64mm (nominal) hole diameter.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka,
Sample intervals are ostensibly the length of the drill steel. Holes are drilled at sufficient angles
sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails,
to allow flushing of the hole with water following each interval to prevent contamination.
face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).
Sludge drilling is not used to inform resource models.
Method of recording and assessing core and chip sample recoveries and results assessed.
RC Drilling
Measures taken to maximise sample recovery and ensure representative nature of the
•
Drill cuttings are extracted from the RC return via cyclone. The underflow from each interval is
samples.
transferred via bucket to a four-tiered riffle splitter, delivering approximately three kilograms of
Whether a relationship exists between sample recovery and grade and whether sample bias may
the recovered material into calico bags for analysis. The residual material is retained on the
have occurred due to preferential loss/gain of fine/coarse material.
ground near the hole. Composite samples are obtained from the residue material for initial
analysis, with the split samples remaining with the individual residual piles until required for resplit analysis or eventual disposal.
RAB / Aircore Drilling
Combined scoops from bucket dumps from cyclone for composite. Split samples taken from
individual bucket dumps via scoop. RAB holes are not included in the resource estimate.
Blast Hole Drilling
•
Logging
•
Cuttings sampled via splitter tray per individual drill rod. Blast holes not included in the
resource estimate.
•
All geology input is logged and validated by the relevant area geologists, incorporated into this
is assessment of sample recovery. No defined relationship exists between sample recovery and
grade. Nor has sample bias due to preferential loss or gain of fine or coarse material been noted.
•
Whether core and chip samples have been geologically and geotechnically logged to a level of •
detail to support appropriate Mineral Resource estimation, mining studies and metallurgical
studies.
•
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.)
photography.
Westgold surface drill-holes are all orientated and have been logged in detail for geology, veining,
alteration, mineralisation and orientated structure. Westgold underground drill-holes are
logged in detail for geology, veining, alteration, mineralisation and structure. Core has been
logged in enough detail to allow for the relevant mineral resource estimation techniques to be
employed.
•
The total length and percentage of the relevant intersections logged
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
•
Surface core is photographed both wet and dry and underground core is photographed wet.
All photos are stored on the Company’s servers, with the photographs from each hole
contained within separate folders.
7
ASX: WGX
Criteria
Sub-sampling techniques
and sample preparation
JORC Code Explanation
Commentary
•
Development faces are mapped geologically.
•
Sludge drilling is logged for lithology, mineralisation and vein percentage.
•
All holes are logged completely, all faces are mapped completely.
•
RAB / AC chips - Combined scoops from bucket dumps from cyclone for composite. Split
samples taken from individual bucket dumps via scoop.
•
RC, RAB and Aircore chips are geologically logged.
•
Logging is quantitative in nature.
•
If core, whether cut or sawn and whether quarter, half or all core taken.
•
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
•
•
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry.
•
Face Chips - Nominally chipped horizontally across the face from left to right, sub-set via
geological features as appropriate.
•
Measures taken to ensure that the sampling is representative of the in-situ material collected, •
including for instance results for field duplicate/second-half sampling.
Diamond Drilling - Half-core niche samples, sub-set via geological features as appropriate.
Grade control holes may be whole-cored to streamline the core handling process if required.
•
Whether sample sizes are appropriate to the grain size of the material being sampled.
•
Chips / core chips undergo total preparation.
•
Samples undergo fine pulverisation of the entire sample by an LM5 type mill to achieve a 75µ
product prior to splitting.
•
QA/QC is currently ensured during the sub-sampling stages process via the use of the systems
of an independent NATA / ISO accredited laboratory contractor. A significant portion of the
historical informing data has been processed by in-house laboratories.
•
The sample size is considered appropriate for the grain size of the material being sampled.
•
The nature, quality and appropriateness of the assaying and laboratory procedures used and •
whether the technique is considered partial or total.
•
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in
determining the analysis including instrument make and model, reading times, calibrations
factors applied and their derivation, etc.
•
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision •
have been established.
•
Recent drilling was analysed by fire assay as outlined below;
♦ A 40g sample undergoes fire assay lead collection followed by flame atomic adsorption
spectrometry.
♦ The laboratory includes a minimum of 1 project standard with every 22 samples
analysed.
♦ Quality control is ensured via the use of standards, blanks and duplicates.
•
Verification of sampling and
assaying
RC - Three tier riffle splitter (approximately 5kg sample). Samples generally dry.
Quality control procedures adopted for all sub-sampling stages to maximise representivity of •
samples.
•
Quality of assay data and
laboratory tests
Blast holes -Sampled via splitter tray per individual drill rods.
•
•
The verification of significant intersections by either independent or alternative company •
personnel.
•
The use of twinned holes.
•
Discuss any adjustment to assay data.
•
•
Documentation of primary data, data entry procedures, data verification, data storage
•
(physical and electronic) protocols.
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
The un-sampled half of diamond core is retained for check sampling if required. For RC chips
regular field duplicates are collected and analysed for significant variance to primary results.
No significant QA/QC issues have arisen in recent drilling results.
Historical drilling has used a combination of Fire Assay, Aqua Regia and PAL analysis.
These assay methodologies are appropriate for the resources in question.
No independent or alternative verifications are available.
Virtual twinned holes have been drilled in several instances across all sites with no significant
issues highlighted. Drillhole data is also routinely confirmed by development assay data in the
operating environment.
Primary data is collected utilising LogChief. The information is imported into a SQL database
server and verified.
•
All data used in the calculation of resources and reserves are compiled in databases
(underground and open pit) which are overseen and validated by senior geologists.
•
No adjustments have been made to any assay data.
8
ASX: WGX
Criteria
Location of data points
JORC Code Explanation
•
•
•
Data spacing and
distribution
Orientation of data in
relation to geological
structure
Sample security
Audits or reviews
•
•
•
Commentary
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), •
trenches, mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
•
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
All data is spatially oriented by survey controls via direct pickups by the survey department.
Drillholes are all surveyed downhole, deeper holes with a Gyro tool if required, the majority
with single / multishot cameras.
All drilling and resource estimation is preferentially undertaken in local mine grid at the various
sites.
•
Topographic control is generated from a combination of remote sensing methods and groundbased surveys. This methodology is adequate for the resources in question.
•
Data spacing is variable dependent upon the individual orebody under consideration. A lengthy
history of mining has shown that this approach is appropriate for the Mineral Resource
estimation process and to allow for classification of the resources as they stand.
Whether the data spacing and distribution is sufficient to establish the degree of geological
and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
•
Compositing is carried out based upon the modal sample length of each individual do-main.
Whether sample compositing has been applied.
•
Whether the orientation of sampling achieves unbiased sampling of possible structures and •
the extent to which this is known, considering the deposit type.
Drilling intersections are nominally designed to be normal to the orebody as far as
underground infrastructure constraints / topography allows.
•
If the relationship between the drilling orientation and the orientation of key mineralised •
structures is considered to have introduced a sampling bias, this should be assessed and •
reported if material.
Where drilling angles are sub optimal the number of samples per drill hole used in the
estimation has been limited to reduce any potential bias.
•
The measures taken to ensure sample security.
•
The results of any audits or reviews of sampling techniques and data
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
Development sampling is nominally undertaken normal to the various orebodies.
•
It is not considered that drilling orientation has introduced an appreciable sampling bias.
•
For samples assayed at on-site laboratory facilities, samples are delivered to the facility by
Company staff. Upon delivery the responsibility for sample security and storage falls to the
independent third-party operators of these facilities.
•
For samples assayed off-site, samples are delivered to a third-party transport service, who in
turn relay them to the independent laboratory contractor. Samples are stored securely until
they leave site.
•
Site generated resources and reserves and the parent geological data is routinely reviewed by
the Westgold Corporate technical team.
9
ASX: WGX
SECTION 2 REPORTING OF EXPLORATION RESULTS
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code Explanation
Commentary
Mineral tenement and land
tenure status
•
Type, reference name/number, location and ownership including agreements or material issues •
with third parties such as joint ventures, partnerships, overriding royalties, native title interests, •
historical sites, wilderness or national park and environmental settings.
Native title interests are recorded against several WGX tenements.
•
The security of the tenure held at the time of reporting along with any known impediments to •
obtaining a licence to operate in the area.
Several third-party royalties exist across various tenements at CMGP, over and above the
state government royalty.
The CMGP tenements are held by the Big Bell Gold Operations (BBGO) of which Westgold has
100% ownership.
The Fortnum Gold Project tenure is 100% owned by Westgold through subsidiary company
Aragon Resources Pty. Ltd. Various Royalties apply to the package. The most pertinent being;
•
♦
Exploration done by other
parties
Geology
•
•
Acknowledgment and appraisal of exploration by other parties
Deposit type, geological setting and style of mineralisation.
•
•
•
•
•
•
The CMGP tenements have an exploration and production history in excess of 100 years.
The FGP tenements have an exploration and production history in excess of 30 years.
•
Westgold work has generally confirmed the veracity of historic exploration data.
•
MGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the
northwest of the Yilgarn Craton. Greenstone belts trending north-northeast are separated by
granite-gneiss domes, with smaller granite plutons also present within or on the margins of
the belts.
The Paddy’s Flat area is located on the western limb of a regional fold, the Polelle Syn- cline,
within a sequence of mafic to ultramafic volcanics with minor interflow sediments and banded
iron-formation. The sequence has also been intruded by felsic porphyry dykes prior to
mineralisation. Mineralisation is located along four sub-parallel trends at Paddy’s Flat which
can be summarized as containing three dominant mineralisation styles:
MGO
•
♦
•
•
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
$10/oz after first 50,000oz (capped at $2M)- Perilya
♦ State Government – 2.5% NSR
The tenure is currently in good standing.
There are no known issues regarding security of tenure.
There are no known impediments to continued operation.
WGX operates in accordance with all environmental conditions set down as conditions for grant
of the leases.
Sulphide replacement BIF hosted gold. Quartz vein hosted shear-related gold.
♦ Quartz-carbonate-sulphide stockwork vein and alteration related gold.
The Yaloginda area is a gold-bearing Archaean greenstone belt situated ~15km south of
Meekatharra. The deposits in the area are hosted in a strained and metamorphosed volcanic
sequence that consists primarily of ultramafic and high-magnesium basalt with minor
komatiite, peridotite, gabbro, tholeiitic basalt and interflow sediments. The sequence was
intruded by a variety of felsic porphyry and intermediate sills and dykes.
The Reedy’s mining district is located approximately 15 km to the south-east to Meekatharra
and to the south of Lake Annean. The Reedy gold deposits occur with- in a north-south
trending greenstone belt, two to five kilometres wide, composed of volcano-sedimentary
sequences and separated multiphase syn- and post-tectonic granitoid complexes. Structurally
controlled the gold occur.
10
ASX: WGX
Criteria
JORC Code Explanation
Commentary
CGO
•
CGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the
northwest of the Yilgarn Craton. Greenstone belts trending north-northeast are separated by
granite-gneiss domes, with smaller granite plutons also present within or on the margins of
the belts.
•
Mineralisation at Big Bell is hosted in the shear zone (Mine Sequence) and is associated with
the post-peak metamorphic retrograde assemblages. Stibnite, native antimony and trace
arsenopyrite are disseminated through the K-feldspar-rich lode schist. These are intergrown
with pyrite and pyrrhotite and chalcopyrite. Mineralisation outside the typical Big Bell host
rocks (KPSH), for example 1,600N and Shocker, also display a very strong W-As-Sb
geochemical halo.
•
Numerous gold deposits occur within the Cuddingwarra Project area, the majority of which
are hosted within the central mafic-ultramafic ± felsic porphyry sequence. Within this broad
framework, mineralisation is shown to be spatially controlled by competency contrasts across,
and flexures along, layer-parallel D2 shear zones, and is maximised when transected by
corridors of northeast striking D3 faults and fractures.
•
The Great Fingall Dolerite hosts the majority gold mineralisation within the portion of the
greenstone belt proximal to Cue (The Day Dawn Project Area). Unit AGF3 is the most brittle
of all the five units and this characteristic is responsible for its role as the most favourable
lithological host to gold mineralisation in the Greenstone Belt.
FGP
Drill hole Information
•
•
•
The Fortnum deposits are Paleoproterozoic shear-hosted gold deposits within the Fortnum
Wedge, a localised thrust duplex of Narracoota Formation within the overlying Ravelstone
Formation. Both stratigraphic formations comprise part of the Bryah Basin in the Capricorn
Orogen, Western Australia.
•
The Horseshoe Cassidy deposits are hosted within the Ravelstone Formation (siltstone and
argillite) and Narracoota Formation (highly-altered, moderate to strongly deformed mafic to
ultramafic rocks). The main zone of mineralisation is developed within a horizon of highly
altered magnesian basalt. Gold mineralisation is associated with strong vein stock works that
are confined to the altered mafic. Alteration consists of two types; stockwork proximal silicacarbonate-fuchsite-haematite-pyrite and distal silica-haematite-carbonate+/- chlorite.
•
The Peak Hill district represents remnants of a Proterozoic fold belt comprising highly
deformed trough and shelf sediments and mafic / ultramafic volcanics, which are generally
moderately metamorphosed (except for the Peak Hill Metamorphic Suite).
Tables containing drillhole collar, downhole survey and intersection data are included in the
body of the announcement.
A summary of all information material to the understanding of the exploration results including •
a tabulation of the following information for all Material drill holes:
♦
easting and northing of the drill hole collar
♦
elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole
collar
♦
dip and azimuth of the hole
♦
down hole length and interception depth
♦ hole length.
If the exclusion of this information is justified on the basis that the information is not Material
and this exclusion does not detract from the understanding of the report, the Competent
Person should clearly explain why this is the case.
23 MAY 2023
GREAT FINGALL - OUTSTANDING DRILL RESULTS CONTINUE
11
ASX: WGX
Criteria
Data aggregation methods
JORC Code Explanation
Share your feedback
Discover