Bluebird Exploration Update
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
Westgold Resources Limited (ASX: WGX, OTCQX: WGXRF – Westgold or the Company) is pleased to provide
an exploration update from drilling at the Bluebird underground mine at Meekatharra in Western Australia.
Highlights
New near mine exploration results continue to warrant the expansion of Bluebird, with highlights
including:
o
35.31m at 5.71g/t Au from 282m in 23BLDD206;
o
23.68m at 12.63g/t Au from 178m in 23BLDD243.
o
42.00m at 4.55g/t Au from 334m in 23BLDD207; and
One surface and three underground drills operating – second surface rig mobilising now.
Infill drilling targeting Bluebird Ore Reserve growth – infilling known areas of South Junction for finalisation
of South Junction decline location.
Resource extension potential – additional drilling targeting under-drilled regions along strike and at depth
below South Junction and Bluebird in search of repeating loads.
Westgold Managing Director Wayne Bramwell commented:
“Grade, scale and efficiency are important in underground mining and our Bluebird mine is beginning
to tick all of these boxes.
Shallow drilling to date has doubled Bluebird underground’s output to ≈500,000 tpa @ 4-5g/t Au and
increased mine life to +3 years. The broader Bluebird trend is ≈7km long and has seen little deep
drilling from any of its owners. The planned programmes will explore potential extensions, increase
Bluebird’s Reserves and ultimately further expand mine output by enabling the development of a
third decline into South Junction during this calendar year”.
Westgold Resources Limited (ASX: WGX | OTCQX:WGXRF)
ACN 009 260 306
Level 6, 200 St Georges Terrace, Perth WA 6000
+61 8 9462 3400
perth.reception@westgold.com.au
www.westgold.com.au
ASX: WGX | OTCQX: WGXRF
Bluebird Underground – Output Doubled to 500,000 tpa @ 4-5 g/t Au
Westgold’s Murchison Operations currently incorporate four operating underground mines (Bluebird, Paddy’s
Flat, Big Bell and Fender) and two processing plants. Westgold’s Bluebird processing hub is at the northern end
of this package and is located approximately 15km southwest of Meekatharra (see Figure 1).
The large Bluebird underground mine and the smaller Paddy’s Flat underground mine at Meekatharra are the
two primary ore sources feeding the 1.6 - 1.8Mtpa Bluebird processing plant. Open pit surface stockpiles and
supplementary ore from Cue is also trucked to Bluebird to maintain processing throughputs.
At Meekatharra, Bluebird and South Junction have produced in excess of 1Moz of gold from predominantly
shallow open pits and small-scale underground workings, with a known mineral endowment in excess of 3,000
ounces per vertical metre. In 2019 Westgold recommenced development at Bluebird, designing a shallow
underground mine that targeted circa 250kt/a production at >3g/t Au.
Since 2022, infill and exploration drilling has expanded the original Bluebird underground mine footprint with
current production rates reaching approximately 500kt/a @ 4-5g/t Au.
Figure 1: Westgold’s Murchison Operations
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
2
ASX: WGX | OTCQX: WGXRF
The Bluebird Trend at Meekatharra
There are many organic exploration and development opportunities across the Bluebird Trend at Meekatharra.
Figure 2 depicts Westgold’s current interpretation of the mineralised trend in which the Bluebird and South
Junction orebodies are located and highlights both the number of historic ore bodies mined and the lack of
deeper drilling along this prospective and fertile ≈7km corridor.
Figure 2: Opportunity - The Bluebird trend hosts multiple shallow open pits with little drilling at depth
The lack of deep exploration drilling along this trend represents an opportunity to extend the existing Bluebird
– South Junction system and potentially discover a repeating orebody within Westgold’s tenure and in close
proximity to the 1.6-1.8Mtpa Bluebird processing hub and supporting infrastructure.
Recent Bluebird drilling results continue to impress
The Bluebird mine has continued to deliver outstanding drill results in the December 2023 quarter, such as:
35.31m at 5.71g/t Au from 282m in 23BLDD206,
42.00m at 4.55g/t Au from 334m in 23BLDD207 and
23.68m at 12.63g/t Au from 178m in 23BLDD243
These results (refer Figure 3) add to the growing body of data that warrants consideration of another mine
expansion.
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
3
ASX: WGX | OTCQX: WGXRF
Figure 3: Bluebird schematic long-section showing significant intersections
Near mine drill testing planned for January 2024
The South Junction and Bluebird open pits are the largest on this trend, having produced in excess of 1Moz to
date. The absence of deeper drilling across the entire mineralised is typical for the entire Meekatharra field and
is particularly evident beyond the Bluebird underground mine footprint (refer Figure 2).
Figure 4: South Junction and Bluebird drilling planned to commence in January
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
4
ASX: WGX | OTCQX: WGXRF
The current Bluebird mine has been developed to approximately 200m below the Bluebird open pit along a
strike of approximately 600m. The full extent of this mineralisation has not yet been closed off along strike or
at depth.
Westgold has commenced systematically drilling to the south of and below the current Bluebird mine. The first
programme (currently underway) will be to infill drill the known extent of the South Junction orebody, with the
intention of growing Ore Reserves and finalising the location for a new portal into the South Junction orebody.
Additional staged campaigns will explore further along the strike of mineralisation and at depth beneath the
known extents of the South Junction and Bluebird orebodies (see Figure 4).
Looking Forward
Current drilling below the Bluebird mine has defined +3 years of life below the existing stoping operation.
Three underground and one surface rig is operating with a second surface rig arriving shortly. The additional
drilling has the potential to extend this mine life, whilst also seeking to build on the current Mineral Resources
and Ore Reserves.
Critically, the drilling also seeks to define the optimum location for a third decline to access the South Junction
orebody. Work on the design of the decline is underway with development options being considered from either
the existing declines within the existing mine or from a new portal within the South Junction Pit.
The development of an additional decline can expand the mining front within the Bluebird- South Junction
footprint and potentially increase underground production from current rates of ≈500ktpa @ 4-5g/t to
≈750ktpa @ 4-5g/t Au at steady state.
ENDS
THIS ANNOUNCEMENT IS AUTHORISED FOR RELEASE TO THE ASX BY THE BOARD.
MEDIA AND INVESTOR RELATIONS ENQUIRIES
INVESTOR RELATIONS
Kasun Liyanaarachchi| Investor Relations Manager
Investor.Relations@westgold.com.au
+61 458 564 483
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
MEDIA
Peter Knight | Communications Manager
Peter.Knight@westgold.com.au
+61 459 980 481
5
ASX: WGX | OTCQX: WGXRF
Competent Person Statements
Exploration Targets, Exploration Results, Mineral Resources and Ore Reserves
The information in this report that relates to Mineral Resources is compiled by Westgold technical employees and contractors
under the supervision of GM Technical Services, Mr. Jake Russell B.Sc. (Hons), who is a member of the Australian Institute of
Geoscientists. Mr Russell is a full-time employee to the Company and has sufficient experience which is relevant to the styles
of mineralisation and types of deposit under consideration and to the activities which he is undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves. Mr Russell consents to the inclusion in this report of the matters based on his information in
the form and context in which it appears. Mr Russell is eligible to participate in short- and long-term incentive plans of the
Company.
The information in this report that relates to Ore Reserve Estimates is based on information compiled by Mr. Leigh Devlin, B.
Eng MAusIMM. Mr. Devlin has sufficient experience which is relevant to the styles of mineralisation and types of deposit
under consideration and to the activities which they are undertaking to qualify as a Competent Person as defined in the 2012
Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr. Devlin
consents to the inclusion in this report of the matters based on his information in the form and context in which it appears.
Mr. Devlin is a full time senior executive of the Company and is eligible to, and may participate in short-term and long-term
incentive plans of the Company as disclosed in its annual reports and disclosure documents.
The information in this report that relates to Exploration Targets and Results is compiled by the Westgold Exploration Team
under the supervision of GM Exploration & Growth, Mr. Simon Rigby B.Sc. (Hons), who is a member of the Australian Institute
of Geoscientists. Mr Rigby is a full-time employee of the Company and has sufficient experience which is relevant to the styles
of mineralisation and types of deposit under consideration and to the activities which he is undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves. Mr Rigby consents to the inclusion in this report of the matters based on his information in the
form and context in which it appears. Mr Rigby is eligible to participate in short-term and long-term incentive plans of the
Company.
Forward Looking Statements
Certain statements in this report relate to the future, including forward looking statements relating to Westgold’s financial
position and strategy. These forward-looking statements involve known and unknown risks, uncertainties, assumptions and
other important factors that could cause the actual results, performance or achievements of Westgold to be materially
different from future results, performance or achievements expressed or implied by such statements. Actual events or results
may differ materially from the events or results expressed or implied in any forward-looking statement and deviations are
both normal and to be expected. Other than required by law, neither Westgold, their officers nor any other person gives any
representation, assurance or guarantee that the occurrence of the events expressed or implied in any forward-looking
statements will actually occur. You are cautioned not to place undue reliance on those statements.
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
6
ASX: WGX | OTCQX: WGXRF
APPENDIX A – BLUEBIRD SIGNIFICANT INTERCEPTS TABLE
All widths are downhole. Coordinates are for hole collars. Grid is MGA 1994 Zone 50. Significant intervals are =
>5g/m for areas of known resources and >2g/m for exploration.
Bluebird
Hole
23BLDD065
23BLDD066
23BLDD066A
Collar N
7,044,168
7,044,168
7,044,168
Collar E
641,509
641,509
641,509
Collar RL
154
154
154
23BLDD067
23BLDD068A
23BLDD069A
23BLDD070
23BLDD203
23BLDD204
23BLDD205
7,044,168
7,044,154
7,044,154
7,044,154
7,043,800
7,043,800
7,043,800
641,509
641,505
641,505
641,505
641,495
641,495
641,495
154
154
154
154
165
165
165
23BLDD206
7,043,800
641,495
165
23BLDD207
7,043,800
641,495
165
23BLDD209
23BLDD209A
7,043,800
7,043,800
641,495
641,495
165
165
23BLDD210
7,046,425
640,202
165
23BLDD211
23BLDD220
23BLDD221
23BLDD222
23BLDD223
23BLDD227
23BLDD229A
23BLDD229B
23BLDD230
23BLDD230A
23BLDD231
23BLDD232
23BLDD233
23BLDD233A
23BLDD234
23BLDD234A
23BLDD235
23BLDD236
23BLDD237
7,043,800
7,044,150
7,044,150
7,044,150
7,044,150
7,043,931
7,043,931
7,043,932
7,043,932
7,043,931
7,043,932
7,043,932
7,043,931
7,043,931
7,043,931
7,043,856
7,043,856
7,043,856
7,043,856
7,043,856
7,043,858
7,043,856
641,495
641,502
641,502
641,502
641,502
641,531
641,531
641,531
641,531
641,530
641,531
641,531
641,530
641,530
641,530
641,502
641,502
641,502
641,502
641,502
641,502
641,502
165
154
154
154
154
151
151
151
151
151
151
151
151
151
151
140
140
140
140
140
140
140
23BLDD238
23BLDD239
7,043,931
7,043,856
641,530
641,502
151
140
23BLDD242
23BLDD243
7,043,802
7,043,801
641,486
641,486
135
135
23BLDD251
7,043,887
641,510
146
23BLDD229
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
Intercept (Downhole)
6.78m at 1.61g/t Au
NSI
From (m)
299
145
Dip
-44
3.41m at 14.78g/t Au
NSI
5.10m at 1.31g/t Au
5.00m at 1.58g/t Au
NSI
NSI
NSI
7.00m at 1.53g/t Au
NSI
3.00m at 19.08g/t Au
3.32m at 1.76g/t Au
6.29m at 4.41g/t Au
5.05m at 2.14g/t Au
10.71m at 2.79g/t Au
1.00m at 13.00g/t Au
35.31m at 5.71g/t Au
6.00m at 2.49g/t Au
19.34m at 3.09g/t Au
17.00m at 3.10g/t Au
42.00m at 4.55g/t Au
28.94m at 5.07g/t Au
NSI
9.68m at 1.87g/t Au
8.00m at 1.08g/t Au
41.55m at 3.72g/t Au
11.90m at 2.34g/t Au
7.00m at 5.77g/t Au
NSI
14.50m at 5.42g/t Au
NSI
7.00m at 3.27g/t Au
NSI
NSI
NSI
NSI
NSI
NSI
9.06m at 7.63g/t Au
NSI
NSI
NSI
NSI
NSI
3.78m at 11.20g/t Au
NSI
4.60m at 3.16g/t Au
8.25m at 4.26g/t Au
NSI
7.00m at 1.07g/t Au
0.87m at 31.71g/t Au
NSI
4m at 2.71g/t Au
2.93m at 6.09g/t Au
4.71m at 11.35g/t Au
23.68m at 12.63g/t Au
12.04m at 5.19g/t Au
0.81m at 11.13g/t Au
1.20m at 6.04g/t Au
21.78m at 6.12g/t Au
NSI
4.00m at 2.20g/t Au
306
321
329
279
303
150
238
226
96
98
257
271
282
105
266
282
125
277
302
334
379
-50
96
-46
-47
-47
-46
-10
-10
-16
111
117
127
136
164
172
168
-21
169
-26
169
-32
-32
169
169
-28
153
-25
-37
-45
-44
-51
-47
-47
-56
-56
-56
-61
-47
-48
-50
-56
-43
-45
-46
-51
-47
-49
-32
175
161
162
151
151
107
107
103
103
104
104
90
126
123
124
104
102
116
115
130
131
122
-38
-53
129
110
-41
-34
139
146
-36
150
90
138
301
118
156
484
391
166
29
258
171
172
29
176
212
226
122
147
135
202
211
203
178
206
220
226
232
257
263
Azi
90
7
ASX: WGX | OTCQX: WGXRF
APPENDIX B – JORC 2012 – GOLD DIVISION
SECTION 1: SAMPLING TECHNIQUES AND DATA
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code Explanation
Commentary
Sampling techniques
•
•
•
•
•
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report.
In cases where ‘industry standard’ work has been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may
be required, such as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant
disclosure of detailed information.
•
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what
method, etc.).
•
•
Method of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the
samples.
Whether a relationship exists between sample recovery and grade and whether sample
bias may have occurred due to preferential loss/gain of fine/coarse material.
•
Drilling techniques
Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised
industry standard measurement tools appropriate to the minerals under investigation,
such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples
should not be taken as limiting the broad meaning of sampling.
Diamond Drilling
A significant portion of the data used in resource calculations has been gathered from diamond
core. Multiple sizes have been used historically. This core is geologically logged and subsequently
halved for sampling. Grade control holes may be whole-cored to streamline the core handling
process if required.
•
Face Sampling
At each of the major past and current underground producers, each development face / round is
horizontally chip sampled. The sampling intervals are domained by geological constraints (e.g. rock
type, veining and alteration / sulphidation etc.). The majority of exposures within the orebody are
sampled.
•
Sludge Drilling
Sludge drilling at is performed with an underground production drill rig. It is an open hole drilling
method using water as the flushing medium, with a 64mm (nominal) hole diameter. Sample intervals
are ostensibly the length of the drill steel. Holes are drilled at sufficient angles to allow flushing of
the hole with water following each interval to prevent contamination. Sludge drilling is not used to
inform resource models.
•
RC Drilling
Drill cuttings are extracted from the RC return via cyclone. The underflow from each interval is
transferred via bucket to a four-tiered riffle splitter, delivering approximately three kilograms of the
recovered material into calico bags for analysis. The residual material is retained on the ground
near the hole. Composite samples are obtained from the residue material for initial analysis, with
the split samples remaining with the individual residual piles until required for re-split analysis or
eventual disposal.
•
RAB / Aircore Drilling
Combined scoops from bucket dumps from cyclone for composite. Split samples taken from
individual bucket dumps via scoop. RAB holes are not included in the resource estimate.
Drill sample recovery
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
•
Blast Hole Drilling
Cuttings sampled via splitter tray per individual drill rod. Blast holes not included in the resource
estimate.
All geology input is logged and validated by the relevant area geologists, incorporated into this is
assessment of sample recovery. No defined relationship exists between sample recovery and grade.
Nor has sample bias due to preferential loss or gain of fine or coarse material been noted.
8
ASX: WGX | OTCQX: WGXRF
Criteria
Logging
JORC Code Explanation
Commentary
•
•
Westgold surface drill-holes are all orientated and have been logged in detail for geology, veining,
alteration, mineralisation and orientated structure. Westgold underground drill-holes are logged
in detail for geology, veining, alteration, mineralisation and structure. Core has been logged in
enough detail to allow for the relevant mineral resource estimation techniques to be employed.
•
Surface core is photographed both wet and dry and underground core is photographed wet. All
photos are stored on the Company’s servers, with the photographs from each hole contained
within separate folders.
•
•
Development faces are mapped geologically.
RC, RAB and Aircore chips are geologically logged.
•
Sludge drilling is logged for lithology, mineralisation and vein percentage.
•
•
Logging is quantitative in nature.
All holes are logged completely, all faces are mapped completely.
•
•
Sub-sampling techniques
and sample preparation
Whether core and chip samples have been geologically and geotechnically logged to a
level of detail to support appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant intersections logged
•
If core, whether cut or sawn and whether quarter, half or all core taken.
•
Blast holes -Sampled via splitter tray per individual drill rods.
•
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or
dry.
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling is representative of the in-situ material
collected, including for instance results for field duplicate/second-half sampling.
•
RAB / AC chips - Combined scoops from bucket dumps from cyclone for composite. Split samples
taken from individual bucket dumps via scoop.
RC - Three tier riffle splitter (approximately 5kg sample). Samples generally dry.
Face Chips - Nominally chipped horizontally across the face from left to right, sub-set via geological
features as appropriate.
Whether sample sizes are appropriate to the grain size of the material being sampled.
•
•
•
•
•
•
•
•
•
•
•
•
Quality of assay data and
laboratory tests
•
•
•
The nature, quality and appropriateness of the assaying and laboratory procedures used
and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters
used in determining the analysis including instrument make and model, reading times,
calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and
precision have been established.
•
Samples undergo fine pulverisation of the entire sample by an LM5 type mill to achieve a 75µ
product prior to splitting.
QA/QC is currently ensured during the sub-sampling stages process via the use of the systems of
an independent NATA / ISO accredited laboratory contractor. A significant portion of the historical
informing data has been processed by in-house laboratories.
The sample size is considered appropriate for the grain size of the material being sampled.
The un-sampled half of diamond core is retained for check sampling if required. For RC chips regular
field duplicates are collected and analysed for significant variance to primary results.
Recent drilling was analysed by fire assay as outlined below;
o
o
•
•
•
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
Diamond Drilling - Half-core niche samples, sub-set via geological features as appropriate. Grade
control holes may be whole-cored to streamline the core handling process if required.
Chips / core chips undergo total preparation.
o
A 40g sample undergoes fire assay lead collection followed by flame atomic adsorption
spectrometry.
The laboratory includes a minimum of 1 project standard with every 22 samples analysed.
Quality control is ensured via the use of standards, blanks and duplicates.
No significant QA/QC issues have arisen in recent drilling results.
Historical drilling has used a combination of Fire Assay, Aqua Regia and PAL analysis.
These assay methodologies are appropriate for the resources in question.
9
ASX: WGX | OTCQX: WGXRF
Criteria
JORC Code Explanation
Commentary
Verification of sampling and
assaying
•
•
No independent or alternative verifications are available.
•
Virtual twinned holes have been drilled in several instances across all sites with no significant issues
highlighted. Drillhole data is also routinely confirmed by development assay data in the operating
environment.
•
Primary data is collected utilising LogChief. The information is imported into a SQL database server
and verified.
All data used in the calculation of resources and reserves are compiled in databases (underground
and open pit) which are overseen and validated by senior geologists.
No adjustments have been made to any assay data.
The verification of significant intersections by either independent or alternative company
personnel.
•
•
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data storage
(physical and electronic) protocols.
•
Discuss any adjustment to assay data.
•
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys),
trenches, mine workings and other locations used in Mineral Resource estimation.
•
•
Specification of the grid system used.
Quality and adequacy of topographic control.
•
•
Location of data points
•
•
•
Data spacing and
distribution
Orientation of data
in relation to
geological structure
Sample security
•
Data spacing for reporting of Exploration Results.
•
•
Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
•
•
Whether sample compositing has been applied.
•
Whether the orientation of sampling achieves unbiased sampling of possible structures and
the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key mineralised
structures is considered to have introduced a sampling bias, this should be assessed and
reported if material.
•
•
The measures taken to ensure sample security.
•
•
•
•
The results of any audits or reviews of sampling techniques and data
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
Data spacing is variable dependent upon the individual orebody under consideration. A lengthy
history of mining has shown that this approach is appropriate for the Mineral Resource estimation
process and to allow for classification of the resources as they stand.
Compositing is carried out based upon the modal sample length of each individual do-main.
Drilling intersections are nominally designed to be normal to the orebody as far as underground
infrastructure constraints / topography allows.
Development sampling is nominally undertaken normal to the various orebodies.
Where drilling angles are sub optimal the number of samples per drill hole used in the estimation
has been limited to reduce any potential bias.
•
It is not considered that drilling orientation has introduced an appreciable sampling bias.
•
For samples assayed at on-site laboratory facilities, samples are delivered to the facility by
Company staff. Upon delivery the responsibility for sample security and storage falls to the
independent third-party operators of these facilities.
For samples assayed off-site, samples are delivered to a third-party transport service, who in turn
relay them to the independent laboratory contractor. Samples are stored securely until they leave
site.
•
Audits or reviews
All data is spatially oriented by survey controls via direct pickups by the survey department.
Drillholes are all surveyed downhole, deeper holes with a Gyro tool if required, the majority with
single / multishot cameras.
All drilling and resource estimation is preferentially undertaken in local mine grid at the various
sites.
Topographic control is generated from a combination of remote sensing methods and groundbased surveys. This methodology is adequate for the resources in question.
•
Site generated resources and reserves and the parent geological data is routinely reviewed by the
Westgold Corporate technical team.
10
ASX: WGX | OTCQX: WGXRF
SECTION 2 REPORTING OF EXPLORATION RESULTS
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code Explanation
Commentary
Mineral tenement and land
tenure status
•
•
•
•
Exploration done by other
parties
•
Geology
•
Type, reference name/number, location and ownership including agreements or
material issues with third parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites, wilderness or national park and
environmental settings.
The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
Acknowledgment and appraisal of exploration by other parties
Deposit type, geological setting and style of mineralisation.
•
•
Native title interests are recorded against several WGX tenements.
The CMGP tenements are held by the Big Bell Gold Operations (BBGO) of which Westgold has 100%
ownership.
Several third-party royalties exist across various tenements at CMGP, over and above the state
government royalty.
The Fortnum Gold Project tenure is 100% owned by Westgold through subsidiary company Aragon
Resources Pty. Ltd. Various Royalties apply to the package. The most pertinent being;
o $10/oz after first 50,000oz (capped at $2M)- Perilya
•
o State Government – 2.5% NSR
The tenure is currently in good standing.
•
There are no known issues regarding security of tenure.
•
•
There are no known impediments to continued operation.
WGX operates in accordance with all environmental conditions set down as conditions for grant of the
leases.
•
The CMGP tenements have an exploration and production history in excess of 100 years.
•
•
The FGP tenements have an exploration and production history in excess of 30 years.
Westgold work has generally confirmed the veracity of historic exploration data.
MGO
•
•
MGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the northwest of
the Yilgarn Craton. Greenstone belts trending north-northeast are separated by granite-gneiss domes,
with smaller granite plutons also present within or on the margins of the belts.
The Paddy’s Flat area is located on the western limb of a regional fold, the Polelle Syn- cline, within a
sequence of mafic to ultramafic volcanics with minor interflow sediments and banded iron-formation.
The sequence has also been intruded by felsic porphyry dykes prior to mineralisation. Mineralisation
is located along four sub-parallel trends at Paddy’s Flat which can be summarized as containing three
dominant mineralisation styles:
o
o
25 JANUARY 2024
BLUEBIRD EXPLORATION UPDATE
Sulphide replacement BIF hosted gold. Quartz vein hosted shear-related gold.
Quartz-carbonate-sulph
Share your feedback
Discover