Starlight Mineral Resource Increases by 41%
Released
Released
Announcement PDF
ASX Announcement
11 June 2024
Starlight Mineral Resource increases by 41%
Westgold Resources Limited (ASX: WGX, OTCQX: WGXRF – Westgold or the Company) is
pleased to provide this update on the Starlight mine at the Company’s Bryah Operation.
Highlights
Significant increase in Mineral Resources at Starlight following an intensive
resource definition campaign.
■
Total Mineral Resource now 590koz post depletion – up by 41%.
■
21% increase in Measured and Indicated Mineral Resource available for Ore
Reserve studies.
The Waterbore Zone within Starlight underground emerging as a potential
new mining front - better results returned from Waterbore Zone this quarter
include:
■
6.46m at 17.2 g/t Au from 136.5m in WB1270RD02;
■
2.2m at 27.35 g/t Au from 72.4m in WB1270RD17; and
■
4.18m at 8.28 g/t Au from 278.9m in WB1270RD18.
Mine planning works on latest Mineral Resource are underway - anticipated
to result in an increase in Ore Reserves to be reported in Westgold’s annual
Mineral Resource and Ore Reserve statement.
Intensive drilling continues at Starlight - with three drill rigs operating.
Westgold Managing Director and CEO Wayne Bramwell commented:
“Organic growth opportunities within Westgold’s high value portfolio continue to be unlocked by
drilling.
The growth in Starlight and emergence of the Waterbore zone we see today is a function of good
science and the investment Westgold made in drilling this mine over the last eighteen months.
The same strategy is being deployed across our main operating assets such as Bluebird-South
Junction, Big Bell and Great Fingall, extending these orebodies and mine lives.
Optimising Starlight to maximise free cash generation over an extended life remains the focus,
with continued exploration success providing the platform to deliver this objective ”.
Westgold Resources Limited
ABN 60 009 260 306
ASX: WGX / OTC: WGXRF
westgold.com.au
T: +61 8 9462 3400
E: perth.reception@westgold.com.au
Level 6, 200 St Georges Terrace
Perth WA 6000
PO Box 7068, Cloisters Square WA 6850
Mineral Resource Update
Over the last eighteen months Westgold has invested substantial resources into extending the
footprint of the mineralised system at Starlight, with three drill rigs employed underground.
The extent of the geological endowment at Starlight necessitates a disciplined approach to
drilling. A balance must be struck between defining the limits of the mineralised zones to allow
efficient capital infrastructure placement and acquiring enough infill information to deliver a
profitable and robust mine plan with minimal execution risk.
The site team have proven that they have this balance right, with Starlight continually achieving
budget physical outputs (FY24 to date +2% on produced ounces), and demonstrating increasing
mine efficiency which has translated to commercial outperformance during the current budget
year (FY24 to date +13% free cash flow when compared to the FY24 budget).
Concurrently, recent drilling programs have delivered a 41% Mineral Resource increase
post depletion compared to the FY23 Starlight Mineral Resource.
Importantly, the newly collected data has been acquired with sufficient granularity to define
330koz in the Measured and Indicated Mineral Resource categories, allowing robust mine
planning and conversion to Ore Reserves to take place.
Improved Starlight Mineral Resource Estimate
Classification
FY24 Mineral Resource
FY23 Mineral Resource
% Delta
Tonnes
(t)
Grade
(g/t Au)
Ounces
(Au)
Tonnes
(t)
Grade
(g/t Au)
Ounces
(Au)
Ounces
(Au)
Measured
864,013
4.00
111,115
780,375
3.81
95,591
+16%
Indicated
1,975,671
3.44
218,506
1,483,470
3.46
165,023
+32%
Inferred
2,588,073
3.13
260,442
1,366,365
3.61
158,586
+64%
Total
5,427,757
3.38
590,063
3,630,210
3.59
419,201
+41%
Table 1 – Improved Starlight Mineral Resource Estimate.
`
Starlight Mineral Resource increases by 41%
11 June 2024
2
Figure 1 – Starlight comparative Mineral Resource footprints, FY23 to current.
Pleasingly, many of the more significant results returned during the current quarter are from the
Waterbore area of the mine (see Figure 2).
Waterbore is a relatively new production zone with only one trial level developed. Despite this,
the tenor of grades seen is providing encouragement that Waterbore can develop over time into
a long-term alternative production source for the Starlight mine.
Starlight Mineral Resource increases by 41%
11 June 2024
3
Figure 2 – Recent Waterbore area diamond drilling results with previous mine plan shown for
comparison.
Looking Forward
The Bryah Operation remains a key production centre and cash generator for Westgold.
Underwritten by the certainty of the Starlight mine’s output, it’s strong operational and
commercial performance and relative operational simplicity allows Westgold to flex the wider
Group’s operations to maximise free cash generation.
The emerging growth opportunities being unlocked by drilling at Nightfall and Waterbore shows
there is much more to be found across this package. The current significant increase in
estimated Mineral Resource extends the planning horizon , enhances certainty for longer and
also allows the focus at Starlight to progress to improving productivity, efficiency and maximising
value.
Westgold looks forward to providing an update on the conversion of the current Mineral Resource
Estimate to Ore Reverse over the coming months.
Starlight Mineral Resource increases by 41%
11 June 2024
4
Bryah Overview
Westgold’s Bryah Operation, located in the Bryah Basin of Western Australia is approximately
140km north of Meekatharra and encompass the 0.9Mtpa Fortnum processing plant and the
Fortnum, Horseshoe and Peak Hill mining areas (see Figure 3). The Starlight underground mine
is the predominant feed source (90% of all processed tonnes with the additional 10% of ore
sourced from surface stockpiles) to Westgold’s Fortnum processing hub.
Figure 3 – Westgold’s Bryah Asset Map.
Homestake Gold Mines (Homestake) developed the Fortnum mineral field during the 1980’s,
after regional reconnaissance work discovered gold mineralisation in outcrop at Tom’s Hill. The
Trev’s, Dougie’s and Twilight gold deposits (all part of the Starlight Mineralisation Complex) were
mined as open pits by Homestake from 1989 to 1993.
In total ≈525,000 ounces of gold have been produced from Starlight at ≈3.1g/t Au to a total
depth of 260m by previous open pit and shallow underground operators (+2,000 ounces per
vertical metre) before mining ceased.
Starlight Mineral Resource increases by 41%
11 June 2024
5
Between 1994 and 1998 Perilya Gold Mines subsequently mined the Trev’s – Starlight open pits,
then the Starlight-Twilight underground from 1999 to 2001.
Westgold has subsequently mined +275koz from the Starlight underground.
Figure 4 – Starlight mine overview.
This announcement is authorised for release to the ASX by the Board.
Investor and media relations enquiries
Investor Relations
Kasun Liyanaarachchi | Investor Relations Manager
investor.relations@westgold.com.au
+61 458 564 483
Starlight Mineral Resource increases by 41%
11 June 2024
Media
Peter Knight | Communications Manager
peter.knight@westgold.com.au
+61 459 980 481
6
Competent Person Statements
Exploration Results and Mineral Resource Estimates
The information in this report that relates to Exploration results and Mineral Resource Estimates is
compiled by Westgold technical employees and contractors under the supervision of Mr. Jake Russell
B.Sc. (Hons), who is a member of the Australian Institute of Geoscientists. Mr Russell is a full-time
employee of the company and has sufficient experience which is relevant to the styles of mineralisation
and types of deposit under consideration and to the activities which he is undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves. Mr Russell consents to the inclusion in this report of the
matters based on his information in the form and context in which it appears. Mr Russell is eligible to
participate in short- and long-term incentive plans of the company.
Ore Reserves
The information in this report that relates to Ore Reserve is based on information compiled by Mr. Leigh
Devlin B.Eng. MAusIMM. Mr. Devlin has sufficient experience which is relevant to the styles of
mineralisation and types of deposit under consideration and to the activities which they are undertaking
to qualify as a Competent Person as defined in the 2012 Editions of the “Australasian Code for Reporting
of Exploration Results, Mineral Resources and Ore Reserves (JORC 2012)”. Mr. Devlin consents to the
inclusion in this report of the matters based on his information in the form and context in which it appears.
Mr. Devlin is a full-time senior executive of the Company and is eligible to and may participate in shortterm and long-term incentive plans of the Company as disclosed in its annual reports and disclosure
documents.
Forward looking statements
Certain statements in this report relate to the future, including forward looking statements relating to
Westgold’s financial position and strategy. These forward-looking statements involve known and unknown
risks, uncertainties, assumptions and other important factors that could cause the actual results,
performance or achievements of Westgold to be materially different from future results, performance or
achievements expressed or implied by such statements. Actual events or results may differ materially
from the events or results expressed or implied in any forward-looking statement and deviations are both
normal and to be expected. Other than required by law, neither Westgold, their officers nor any other person
gives any representation, assurance or guarantee that the occurrence of the events expressed or implied in
any forward-looking statements will actually occur. You are cautioned not to place undue reliance on those
statements.
Starlight Mineral Resource increases by 41%
11 June 2024
7
APPENDIX A – Recent Drill Results
Lode
Dougie's
Nightfall
Hole
Collar N
Collar E
Collar RL
DG1270RD01
7,199,084
636,636
276.6
DG1270RD02
7,199,084
636,636
276.9
NF1125RD14
7,198,907
636,458
118.6
Dip
Azi
Total
Depth
(m)
Intercept (Downhole)
From (m)
NSI
-
-8.0
9.2
318.8
3.90 m at 1.45 g/t Au
219.1
-8.0
357.7
327.6
3.30 m at 2.34 g/t Au
171.0
-26.0
15.5
341.8
3.35 m at 3.26 g/t Au
220.0
NF1125RD19
7,198,907
636,459
118.5
4.68 m at 3.4 g/t Au
244.3
-40.1
23.6
284
NF1125RD20
7,198,907
636,458
118.4
10.00 m at 3.94 g/t Au
155.9
-34.4
14.7
332.9
2.40 m at 8.15 g/t Au
196.2
5.73 m at 1.83 g/t Au
210.3
13.00 m at 2.67 g/t Au
236.0
10.00 m at 2.15 g/t Au
272.0
2.40 m at 7.18 g/t Au
300.6
-29.3
8.3
327.9
NF1125RD21
7,198,907
636,458
118.5
NF1125RD22
7,198,907
636,458
118.5
NSI
-
-6.0
0.2
74.8
NF1125RD23
7,198,910
636,455
120
NSI
-
7.3
354.3
95.5
NF1125RD24
7,198,910
636,455
119.9
NSI
-
-37.9
9.1
355
NF1130EX06
7,198,755
636,310
136.7
340.5
-51.0
43.2
380.3
NF1130EX07
7,198,754
636,310
136.4
-
-65.0
39.2
381
NF1130EX08
7,198,755
636,310
136.4
2.04 m at 3.49 g/t Au
358.0
-65.0
34.2
410.5
4.05 m at 3.49 g/t Au
389.3
5.11 m at 2.61 g/t Au
301.0
-61.0
46.2
3.08 m at 3.97 g/t Au
368.1
17.0
58.2
50.9
-10.8
60.9
49.7
19.2
255.3
59.5
NF1130EX09A
7,198,755
636,310
136.4
NF1140GC116
7,198,755
636,310
136.4
NF1140GC117
7,198,755
636,310
136.4
NF1140GC95
7,198,755
636,310
136.4
Starlight Mineral Resource increases by 41%
11 June 2024
4.04 m at 4.11 g/t Au
NSI
NSI
-
8.10 m at 1.86 g/t Au
NSI
23.5
-
378
8
Lode
Starlight
Waterbore
Hole
Collar N
Collar E
Collar RL
ST1280GC27
7,198,919
636,786
ST1385RD01
7,198,658
ST1385RD02
Total
Depth
(m)
Intercept (Downhole)
From (m)
Dip
Azi
280.6
NSI
-
-19.8
335.6
54
636,960
384.4
NSI
-
2.5
95.2
53.6
7,198,658
636,960
385.7
NSI
-
32.0
95.2
61
ST1385RD03
7,198,660
636,960
384.4
NSI
-
2.5
73.2
53.1
ST1385RD04
7,198,658
636,960
385.8
NSI
-
24.0
73.2
52.2
ST1385RD05
7,198,658
636,960
386
NSI
-
40.0
73.2
72.2
ST1385RD06
7,198,661
636,959
386.5
NSI
-
42.0
59.2
71.2
ST1385RD07
7,198,661
636,959
384.3
NSI
-
24.0
49.2
76.7
ST1385RD08
7,198,661
636,958
386.5
42.0
36.2
71.3
ST1385RD09
7,198,661
636,959
384.3
NSI
-
2.5
30.2
69
ST1385RD10
7,198,661
636,959
385
NSI
-
21.0
22.2
69
ST1385RD11
7,198,661
636,958
386.4
36.0
12.2
74.2
ST1385RD12
7,198,661
636,959
385.1
-
2.5
10.2
74
WB1270RD01
7,199,084
636,633
277
4.65 m at 3.93 g/t Au
151.0
-4.0
336.2
168.3
3.00 m at 8.16 g/t Au
163.0
10.54 m at 2.02 g/t Au
67.0
-4.0
330.2
150
6.46 m at 17.2 g/t Au
136.5
2.00 m at 4.45 g/t Au
80.0
-8.0
313.2
166.7
2.80 m at 5.38 g/t Au
118.2
-14.0
332.2
180
WB1270RD02
WB1270RD04
7,199,084
7,198,661
636,633
636,959
277
385.1
WB1270RD04
3.60 m at 3.6 g/t Au
52.0
2.20 m at 3.24 g/t Au
NSI
WB1270RD06
7,199,084
636,633
276.6
WB1270RD07
7,199,084
636,633
276.8
3.40 m at 2.84 g/t Au
71.6
-14.0
324.2
150
WB1270RD08
7,199,084
636,633
276.5
2.00 m at 3.08 g/t Au
42.0
-18.0
313.2
155.6
2.85 m at 2.91 g/t Au
62.0
2.08 m at 2.54 g/t Au
85.4
Starlight Mineral Resource increases by 41%
11 June 2024
NSI
61.8
-
9
Lode
Hole
Collar N
Collar E
Collar RL
WB1270RD09
7,199,084
636,633
276.6
WB1270RD10
7,199,084
636,633
276.5
Total
Depth
(m)
Intercept (Downhole)
From (m)
Dip
Azi
NSI
-
-20.0
323.2
189
-25.0
319.2
177.6
5.66 m at 4.16 g/t Au
52.0
8.16 m at 1.39 g/t Au
65.4
WB1270RD11
7,199,083
636,632
276.2
2.00 m at 6.1 g/t Au
58.0
-25.0
311.2
165.5
WB1270RD12
7,199,083
636,632
275.9
2.07 m at 4.17 g/t Au
65.9
-32.0
311.2
182.2
8.16 m at 5.89 g/t Au
70.1
5.42 m at 3.58 g/t Au
68.0
-30.0
319.2
188.6
2.40 m at 3.56 g/t Au
141.0
WB1270RD13
7,199,083
636,632
275.9
WB1270RD15
7,199,083
636,632
276.2
4.22 m at 2.07 g/t Au
55.1
-20.5
308.0
128
WB1270RD16
7,199,083
636,632
276.1
2.00 m at 3.19 g/t Au
44.0
-27.0
306.7
143
WB1270RD17
7,199,083
636,632
276
2.20 m at 27.35 g/t Au
72.4
-33.8
306.8
180
4.60 m at 6.83 g/t Au
83.4
4.00 m at 5.35 g/t Au
141.0
3.52 m at 2.34 g/t Au
152.5
-70.2
314.3
345
2.00 m at 9.27 g/t Au
211.0
4.18 m at 8.28 g/t Au
278.9
WB1270RD18
Starlight Mineral Resource increases by 41%
11 June 2024
7,199,082
636,634
275.7
10
APPENDIX B – JORC 2012 TABLE 1 – GOLD DIVISION
SECTION 1: SAMPLING TECHNIQUES AND DATA
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling techniques
JORC Code Explanation
•
•
•
•
Drilling techniques
•
Drill sample recovery
•
•
•
Nature and quality of sampling (e.g. cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma sondes,
or handheld XRF instruments, etc.). These examples should not be
taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required, such
as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc.).
Method of recording and assessing core and chip sample recoveries
and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain
of fine/coarse material.
Starlight Mineral Resource increases by 41%
11 June 2024
Commentary
Diamond Drilling
•
A significant portion of the data used in resource calculations has been gathered from diamond
core. Multiple sizes have been used historically. This core is geologically logged and
subsequently halved for sampling. Grade control holes may be whole-cored to streamline the
core handling process if required.
Face Sampling
•
At each of the major past and current underground producers, each development face / round
is horizontally chip sampled. The sampling intervals are domained by geological constraints
(e.g. rock type, veining and alteration / sulphidation etc.). The majority of exposures within the
orebody are sampled.
Sludge Drilling
•
Sludge drilling at is performed with an underground production drill rig. It is an open hole drilling
method using water as the flushing medium, with a 64mm (nominal) hole diameter. Sample
intervals are ostensibly the length of the drill steel. Holes are drilled at sufficient angles to allow
flushing of the hole with water following each interval to prevent contamination. Sludge drilling
is not used to inform resource models.
RC Drilling
•
Drill cuttings are extracted from the RC return via cyclone. The underflow from each interval is
transferred via bucket to a four-tiered riffle splitter, delivering approximately three kilograms of
the recovered material into calico bags for analysis. The residual material is retained on the
ground near the hole. Composite samples are obtained from the residue material for initial
analysis, with the split samples remaining with the individual residual piles until required for resplit analysis or eventual disposal.
RAB / Aircore Drilling
•
Combined scoops from bucket dumps from cyclone for composite. Split samples taken from
individual bucket dumps via scoop. RAB holes are not included in the resource estimate.
Blast Hole Drilling
•
Cuttings sampled via splitter tray per individual drill rod. Blast holes not included in the
resource estimate.
•
All geology input is logged and validated by the relevant area geologists, incorporated into this
is assessment of sample recovery. No defined relationship exists between sample recovery and
grade. Nor has sample bias due to preferential loss or gain of fine or coarse material been noted.
11
Criteria
Logging
JORC Code Explanation
•
•
•
Sub-sampling techniques
and sample preparation
Commentary
Whether core and chip samples have been geologically and •
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
•
costean, channel, etc.) photography.
The total length and percentage of the relevant intersections logged
•
Westgold surface drill-holes are all orientated and have been logged in detail for geology, veining,
alteration, mineralisation and orientated structure. Westgold underground drill-holes are
logged in detail for geology, veining, alteration, mineralisation and structure. Core has been
logged in enough detail to allow for the relevant mineral resource estimation techniques to be
employed.
Surface core is photographed both wet and dry and underground core is photographed wet. All
photos are stored on the Company’s servers, with the photographs from each hole contained
within separate folders.
Development faces are mapped geologically.
•
•
•
RC, RAB and Aircore chips are geologically logged.
Sludge drilling is logged for lithology, mineralisation and vein percentage.
Logging is quantitative in nature.
•
All holes are logged completely, all faces are mapped completely.
•
If core, whether cut or sawn and whether quarter, half or all core taken. •
•
If non-core, whether riffled, tube sampled, rotary split, etc. and
whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the insitu material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
•
•
•
•
•
•
•
•
•
•
•
•
•
Quality of assay data
and laboratory tests
•
•
•
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (i.e. lack of bias) and precision have been established.
Starlight Mineral Resource increases by 41%
11 June 2024
•
Blast holes -Sampled via splitter tray per individual drill rods.
RAB / AC chips - Combined scoops from bucket dumps from cyclone for composite. Split
samples taken from individual bucket dumps via scoop.
RC - Three tier riffle splitter (approximately 5kg sample). Samples generally dry.
Face Chips - Nominally chipped horizontally across the face from left to right, sub-set via
geological features as appropriate.
Diamond Drilling - Half-core niche samples, sub-set via geological features as appropriate.
Grade control holes may be whole-cored to streamline the core handling process if required.
Chips / core chips undergo total preparation.
Samples undergo fine pulverisation of the entire sample by an LM5 type mill to achieve a 75µ
product prior to splitting.
QA/QC is currently ensured during the sub-sampling stages process via the use of the systems
of an independent NATA / ISO accredited laboratory contractor. A significant portion of the
historical informing data has been processed by in-house laboratories.
The sample size is considered appropriate for the grain size of the material being sampled.
The un-sampled half of diamond core is retained for check sampling if required. For RC chips
regular field duplicates are collected and analysed for significant variance to primary results.
•
Recent drilling was analysed by fire assay as outlined below;
¨
A 40g sample undergoes fire assay lead collection followed by flame atomic adsorption
spectrometry.
¨
The laboratory includes a minimum of 1 project standard with every 22 samples analysed.
¨
Quality control is ensured via the use of standards, blanks and duplicates.
No significant QA/QC issues have arisen in recent drilling results.
•
•
Historical drilling has used a combination of Fire Assay, Aqua Regia and PAL analysis.
These assay methodologies are appropriate for the resources in question.
12
Criteria
Verification of sampling and
assaying
JORC Code Explanation
•
•
•
•
Commentary
The verification of significant intersections by either independent or •
alternative company personnel.
•
The use of twinned holes.
Documentation of primary data, data entry procedures, data
•
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
•
•
Location of data points
•
•
•
Data spacing
and distribution
Sample security
All data is spatially oriented by survey controls via direct pickups by the survey department.
Drillholes are all surveyed downhole, deeper holes with a Gyro tool if required, the majority with
single / multishot cameras.
All drilling and resource estimation is preferentially undertaken in local mine grid at the various
sites.
Topographic control is generated from a combination of remote sensing methods and groundbased surveys. This methodology is adequate for the resources in question.
•
Data spacing is variable dependent upon the individual orebody under consideration. A lengthy
history of mining has shown that this approach is appropriate for the Mineral Resource
estimation process and to allow for classification of the resources as they stand.
Compositing is carried out based upon the modal sample length of each individual domain.
Data spacing for reporting of Exploration Results.
•
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and •
classifications applied.
Whether sample compositing has been applied.
•
•
Whether the orientation of sampling achieves unbiased sampling of •
possible structures and the extent to which this is known, considering
the deposit type.
•
If the relationship between the drilling orientation and the orientation •
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
•
Drilling intersections are nominally designed to be normal to the orebody as far as underground
infrastructure constraints / topography allows.
Development sampling is nominally undertaken normal to the various orebodies.
Where drilling angles are sub optimal the number of samples per drill hole used in the
estimation has been limited to reduce any potential bias.
It is not considered that drilling orientation has introduced an appreciable sampling bias.
•
The measures taken to ensure sample security.
•
For samples assayed at on-site laboratory facilities, samples are delivered to the facility by
Company staff. Upon delivery the responsibility for sample security and storage falls to the
independent third-party operators of these facilities.
For samples assayed off-site, samples are delivered to a third-party transport service, who in
turn relay them to the independent laboratory contractor. Samples are stored securely until
they leave site.
•
Audits or reviews
Virtual twinned holes have been drilled in several instances across all sites with no significant
issues highlighted. Drillhole data is also routinely confirmed by development assay data in the
operating environment.
Primary data is collected utilising LogChief. The information is imported into a SQL database
server and verified.
All data used in the calculation of resources and reserves are compiled in databases
(underground and open pit) which are overseen and validated by senior geologists.
No adjustments have been made to any assay data.
Accuracy and quality of surveys used to locate drill holes (collar and •
down-hole surveys), trenches, mine workings and other locations used
in Mineral Resource estimation.
Specification of the grid system used.
•
Quality and adequacy of topographic control.
•
•
•
Orientation of data in
relation to geological
structure
No independent or alternative verifications are available.
•
The results of any audits or reviews of sampling techniques and data
Starlight Mineral Resource increases by 41%
11 June 2024
•
Site generated resources and reserves and the parent geological data is routinely reviewed by
the Westgold Corporate technical team.
13
SECTION 2: REPORTING OF EXPLORATION RESULTS
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral tenement and land
tenure status
JORC Code Explanation
•
•
Type, reference name/number, location and ownership
including agreements or material issues with third parties
such as joint ventures, partnerships, overriding royalties,
native title interests, historical sites, wilderness or national
park and environmental settings.
The security of the tenure held at the time of reporting along
with any known impediments to obtaining a licence to operate
in the area.
Commentary
•
•
•
•
•
•
•
•
Exploration done by other
parties
•
Acknowledgment and appraisal of exploration by other •
parties
•
•
Geology
•
Deposit type, geological setting and style of mineralisation.
Native title interests are recorded against several WGX tenements.
The CMGP tenements are held by the Big Bell Gold Operations (BBGO) of which Westgold has 100%
ownership.
Several third-party royalties exist across various tenements at CMGP, over and above the state
government royalty.
The Fortnum Gold Project tenure is 100% owned by Westgold through subsidiary company Aragon
Resources Pty. Ltd. Various Royalties apply to the package. The most pertinent being;
¨
State Government – 2.5% NSR
The tenure is currently in good standing.
There are no known issues regarding security of tenure.
There are no known impediments to continued operation.
WGX operates in accordance with all environmental conditions set down as conditions for grant of the
leases.
The CMGP tenements have an exploration and production history in excess of 100 years.
The FGP tenements have an exploration and production history in excess of 30 years.
Westgold work has generally confirmed the veracity of historic exploration data.
MGO
•
MGO is located in the Achaean Murchison Province, a granite-greenstone terrane in the northwest of the
Yilgarn Craton. Greenstone belts trending north-northeast are separated by granite-gneiss domes, with
smaller granite plutons also present within or on the margins of the belts.
•
The Paddy’s Flat area is located on the western limb of a regional fold, the Polelle Syn- cline, within a
sequence of mafic to ultramafic volcanics with minor interflow sediments and banded iron-formation.
The s
Share your feedback
Discover